Thermador · Repair guide
Thermador repair: the Star Burner problem and what else fails
Thermador's identity is the Star Burner, and the Star Burner is also the reason Thermador repairs go wrong. The five-point brass cap puts the igniter electrode in a position that is not where a technician trained on ordinary round burners expects to find it, and the tip has to align precisely with the gas ports. Get that wrong and the burner lights badly, or not at all, no matter how many parts were replaced.
What fails, and what it means
| What you see | What is usually behind it | Urgency |
|---|---|---|
| Star Burner will not light or lights unevenly | Igniter position, alignment, or a failed electrode. Alignment matters more here than on any other residential range. | High |
| Wall oven not heating | Element, relay or thermostat. The standard electric oven diagnosis, and usually straightforward. | High |
| ExtraLow will not hold a low setting | The ExtraLow cycle control. Specific to the platform and frequently misdiagnosed as a valve problem. | Medium |
| Temperature calibration off | Sensor drift or calibration. Worth checking before replacing anything expensive. | Medium |
| Control faults on newer models | Control board. Confirm the diagnosis, because the part is not cheap. | Medium |
What the repair costs
| Job | Typical cost |
|---|---|
| Star Burner igniter or alignment | $200 to $650 |
| Wall oven element or relay | Typically in the same range, at the lower end |
| Control board | The expensive branch — confirm the diagnosis first |
| Diagnostic visit | From $145, often credited toward the repair |
Questions to ask before you authorise the work
- Have you worked on this model before, and can you get genuine parts for it?
- Is the diagnostic fee credited toward the repair?
- What is the part number you are proposing, and is the diagnosis based on a measurement or on the symptom alone?
- If this does not fix it, what happens to what I have already paid?
Get the model and serial number before you call anyone. It is inside the door frame on most refrigerators and behind the storage drawer or on the frame on most ranges. Every honest quote for a Thermador starts with it, and a shop that does not ask is a shop that is about to guess.
Frequent questions
How much does Thermador range repair cost?
Pro range repairs commonly run $200 to $650, with Star Burner ignition work at the top of that range. Wall oven element and relay replacements usually land at the lower end.
Why is the Star Burner harder to repair than a normal burner?
The igniter electrode sits in a different position than on a standard round burner cap, and the tip must align precisely with the gas ports. A technician who does not know the platform will replace parts without fixing the alignment, and the burner keeps failing.
What is the ExtraLow setting and why does it fail?
ExtraLow cycles the burner on and off at very low output rather than running a continuous tiny flame. The cycle control is specific to the platform, and a failure looks like a valve problem but is not.
Should I repair or replace a Thermador range?
Repair, unless the fault is structural. The parts are available and the platform is supported. The calculation changes if a control board and a burner assembly both fail in the same year.